The Benefits Of Electrical Panel Upgrades

Electrical Panel Upgrades for Solar: A Technical Case Study

looking to reduce his electric bill by going solar and he decided to call an installation company that he found on the internet. The next day, a rep from XYZ Solar came out to his house and, after looking at his electric bill, told that he would need an 8.5kW PV system to offset 100% of his past 12-month usage.

Two days later, received a call from the same rep and was told that, unfortunately, the main panel upgrade would be required, adding an additional $2,000 to the cost of the project. When the rep tried to explain why an upgrade would be necessary, the explanation made much less sense. In fact, it made no sense at all when the rep told John, “Normally, an upgrade would not be necessary, but your main service panel is center-fed, which is why an upgrade – in your case – is required”.

In many cases, a homeowner could be spared the $2K expense if the installation company were to perform a simple load calculation to determine whether or not de-rating the main breaker is possible, safe, and passable by city inspectors. For project, a 7600W string inverter is being proposed by the installation company – a good choice, and the spec sheet shows 40 amps of back-feed protection is required by the main service panel in order for this inverter to be connected

Project aspects like this might sound slightly complicated, which was why Solar was founded – to ensure the consumer is protected when technical aspects of projects are laid out.

Cost to Replace a Circuit Breaker Box

How much can you expect to pay a qualified electrician to replace a breaker box?

Cost to replace circuit breaker box

“It depends on how many circuits you have, the existing conditions, whether it’s a single-family dwelling, multi-family dwelling and the amperage of the panel — whether it’s a 100, 150, 200 amp,” says It could range anywhere from $500 to $1,300, depending on site conditions.”

installed, replaced or upgraded breaker boxes in 2014 reported paying an average of $1,932 with a general range of $1,625 to $2,225, not counting discounts many service

Instead, advises homeowners to upgrade a circuit breaker box because it protects electronic devices and the data contained within them. “I tend to go with that logic that almost everyone has something electronic in their home with valuable information inside that electronic equipment,” he says. “Whether you’re a video game person or a stock market trader or you collect family photos, whatever your area of interest, that’s the best reason to have up-to-date, functional electrical equipment protecting your home.”

How prevalent are Stab-Lok breakers?

Federal Pacific circuit breaker panels, with their faulty Stab-Lok breakers, still lurk in many older homes, says “Each electrical supplier is going to sell a manufacturer that they support. When you have a company that’s producing them three towns over from where your supply houses are, most suppliers sold Federal Pacific electrical panels, and that’s why everybody had them.”

Both electricians report trying to help customers who stubbornly decline service to replace their old breaker boxes. “I have Federal Pacific panels in customers’ homes who are not willing to replace them,”

Signs Your Electrical Panel Needs An Upgrade

As a homeowner, it comes as no surprise that equipment in your home requires maintenance over time. Electrical panels, or circuit breakers, are no different. Aside from the fact that they are out of sight and typically out of mind, usually come in contact with electrical panel only in the unfortunate event need to reset a breaker! With infrequent visits, how can you tell if you need to replace your electrical panel? Here are a few tell-tale signs that your electrical panel is in need of replacement.

It’s Old!

Do you know how old your electrical panel is?  If you don’t, chances are it might be relatively old. Homes today have more electrical needs than they did in the past! Making sure your electrical panel is up to date and is equipped to power your home is important to consider. It’s a good idea to have an experienced electrician take a look if you have concerns about the age of your electrical panel.

Frequent Tripped Breakers

If you are constantly resetting breakers, it could be a sign that your electrical panel cannot power the electrical needs of your home. Tripped breakers happen to everyone. In fact, they are designed to do just that! As a necessary safety measure, circuit breakers “trip” to protect your home from overloaded and short circuits. Even dangerous electrical fires. So, tripped breakers are actually a good thing, just not when it’s happening around the clock!

Burning Smells

As with any area of your home, there is always cause for concern when you start to smell something burning. In the case of your electrical panel, the concern is a little bit higher. Seeing as 51,000 electrical accidents happen each year according to the Electrical Safety Foundation International. Hence, if you notice burning smells coming from outlets or your electrical panel, call Service Professor!

Appliance Upgrades

Have you made major appliance upgrades lately? Larger appliances require a higher electrical draw than older appliances and typically will need an upgraded electrical panel for the extra capacity required.  If you are planning to upgrade some appliances in the near future, ensure your electrical panel is up for the challenge!


As modern electrical needs and demands have increased, the same demand for higher and more reliable power. To meet modern electrical needs and ensure your electrical system is safe, you might have to upgrade your residential electrical panel.

At some point, any homeowner will likely find themselves in the position where an upgrade is necessary. When that time comes, it is important to know what to expect and how much it’ll cost. That way, you can make the most informed and cost-effective decision for your home and lifestyle.

When and why replace an electrical panel?

Like all things, electrical panels have a set lifespan before they eventually need to be replaced. The older the wires in the panel, the more risk there is of short-circuiting or even sparking hazardous electrical fires. It is possible that your older panel is not up to recent code, and for safety reasons, an upgrade is needed. Other times, it may just be that your household’s power needs have changed and so an upgrade is in order. Either way, knowing the signs or reasons you need an upgrade or replacement will help with that final decision.

Signs it’s time to replace the electrical panel

Regular maintenance and checkups by a professional will help keep your electrical panel in excellent condition. Generally, this should be done at least every 3-5 years. That said, any problems that come up before, such as an overloaded circuit, can pose premature issues. If that happens, don’t wait to buy a replacement and risk a safety hazard. Instead, knowing the signs of when it’s time to replace will help keep your home safe.

Breakers trip frequently: If your safety panel is getting old, it may wear down and be more at risk of power surges. When this happens, the circuit breakers will trip more often as a result. It may also be that your home’s electrical demands are too high for the electrical panel and is causing it to trip more often.

Breakers don’t reset: A related problem with breakers tripping is if they don’t reset afterward. In this case, it’s likely a fault with the electrical panel itself. A professional electrician is the best way to identify the problem and then either repair or replace it.

Burn marks or odours: The wires inside the panel can also wear down, and as they do, it risks causing electrical fires inside the panel. That is a more severe problem that should be dealt with immediately by a professional. If any wires become exposed, that is another safety hazard that should never be ignored. Turn off the power and call in a professional right away.

Flickering lights: If the problem isn’t fixed at the light source, it may be a problem with a lack of energy. You might notice lights flickering when the microwave runs or the furnace kicks in. Old homes have fewer circuits, so they aren’t able to meet the demands of modern electrical needs. Replacing your old electrical panel or adding more power will help stop this problem.

What To Know About Upgrading Your Circuit Breaker Panel

Your home’s circuit breaker plays an important role in supplying the power you and your family need for all of your appliances and electronics. Typically, older homes were built with 60- or 100-amp breaker panels; unfortunately, this is quickly becoming an insufficient amount of power with all of the high-tech appliances and electronics homeowners have these days. The good news is that a residential electrician in Tampa can upgrade your home’s circuit panel to supply you with all the power you need.

Why Should You Upgrade Your Circuit Breaker Panel?

There are lots of good reasons to upgrade your home’s circuit panel. For one, an old electrical circuit breaker panel can pose a safety hazard. Old circuit breaker panels can also struggle to deliver the power you need to use all of the appliances and electronics in your home, and in some cases might even damage these expensive belongings due to power surges. Upgrading your electrical panel is an investment in your safety and in the continued performance of your valuable appliances and electronics.

What are the Signs That I Should Upgrade My Circuit Breaker?

The sooner you upgrade your circuit breaker panel, the better. But how do you know when to contact a licensed electrician in Tampa to upgrade your home’s service panel? A few warning signs that it’s time to replace your circuit breaker panel include:

Frequently tripping circuit breakers

Flickering lights when appliances or electronics are in use

Burning smells or smoke coming from the panel

How Much Does a Circuit Panel Upgrade Cost?

The cost to upgrade your home’s circuit panel depends on a number of different factors, including the size of your home, the age of your electrical system, and any additional electrical system upgrades or repairs that will be made at the same time as the breaker panel upgrade. Contact a residential electrician today for a quote on a circuit breaker panel upgrade.

Signs That Your Home May Need Mold Remediation

Mold Remediation Resource

Nobody wants to discover mold growth in their home. In addition to the musty odor and the unsightly appearance, mold can contribute to health effects and structural damage to our property. Yet we’ve found many property owners have misconceptions about mold and how it should be treated.

learned what property owners need and want to know about mold and the remediation process. That’s why we’ve put together this resource page to help you find the information you need!

The process for mold remediation—like any other restoration service—can vary depending on the extent of the mold’s growth. Regardless, it’s a good idea to be familiar with the general process so you have a better understanding of what will need to happen at your property.

Understandably, most homeowners have a lot of questions about mold. Having heard many of them over the past 10 years, we’ve dedicated our blog to answering some of your most burning questions. Below you’ll find a list of some of our most popular mold-related blog posts.

Mold spores are everywhere—both in and out of your home. These spores aren’t often an issue, however, until they come into contact with moisture and begin to grow into colonies. Once this growth occurs, the colonies produce more spores and begin to consume the organic surfaces they reside on. Because moisture is essential for this growth, there are several places that commonly have mold growth.

Window Sills. You’ve probably seen it before—moisture on your windows. As a result of condensation, water often collects along windows and drips down to the window sill. Unless this is addressed or dried consistently, it opens the opportunity for mold growth to occur.

Bathtubs. Bathtubs are one of the most common places to find mold. Water—logically—is ever present, and when bathrooms are not well-ventilated, the moisture does not escape, which gives mold exactly what it needs.

Location of Recent Water Damage. Water damages can occur to anyone—pipes burst, water heaters leak, toilets overflow, etc. But unless these damages are quickly addressed and properly handled, they can encourage mold growth.

What is Microbial Contamination?

What is Microbial Contamination? Where does mold come from? Is microbial contamination a health concern issue? How do you properly get rid of a microbial contamination?

Microbial contamination refers to a variety of microorganisms, including mold, bacteria, viruses and protozoa; and fungi, which includes molds, yeasts, and their by products and toxins. All of these can affect the health of a building and its occupants.

As a starting point the proper job sequencing for a typical microbial-remediation project includes but it not limited to: identifying and stopping the source of moisture; setting up containment; establishing negative air; removing contaminated building materials; cleaning surfaces; drying the affected areas; conducting a post remediation evaluation.

Never use a DIY mold test, Heres why!

If you look on the internet, there are scores of DIY mold test kits. Before you invest in one of these kits, here are things you ought to know about mold:

Mold is everywhere and every single house has some form of “mold.”

Most self-test mold kits only tell you if your home has mold, but often provides false negatives and positives. It also does not tell you what kind of mold or how to kill it.

A true mold test can only be conducted by a Professional Environmental testing company; they determine the type of mold, the source of the moisture, and how to kill the mold at the core. They create a protocol, which can be read by an IICRC professional (like us!).  It’s best to use a testing company that does not do cleaning themselves because their assessment will be unbiased.

Is Your Mold Damage Covered?

A pipe bursts in your home, so you call a plumber and water restoration experts to fix the damage. Before they arrive, however, you start to notice a musty odor near the affected area and you see mold growth on a nearby wall. Mold can start to grow in as little as 24 hours after water damage has occurred. One question you probably have is whether or not your homeowner’s insurance will cover the cost of the remediation. The answer depends on a couple of factors.

Covered Peril

The first thing your insurance provider may want to determine is the cause of the mold damage. Many basic policies cover the cost of mold mitigation if the issue is related to a covered peril:

Recent pipe break or leak

Overflowing toilet

Broken appliance

Roof leak

With most homeowner’s coverage, there are two elements that determine whether an event constitutes a covered peril. Did it happen suddenly, and was it an accident? If those two conditions exist, it is likely that not only the initial water damage but also any related secondary damage such as mold growth will be covered by your provider. If, however, the damage occurs as a result of an ongoing problem or your negligence, you will probably have to pay for the repairs out of pocket.

Policy Additions

Some policies spell out limited coverage for mold damage explicitly. Many insurance providers offer separate mold insurance to supplement the general homeowner’s policy. This coverage is called an endorsement, and there is an additional fee to add this particular protection. Your agent can advise you on the best coverage for your home and let you know what options are available to you.

Understanding Mold Coverage for Renters

When you live in a house or apartment you don’t own, it is advisable to purchase a good rental insurance policy. That way, if your belongings are harmed or destroyed, you can get help paying for them to be replaced. Does your policy cover mold damage, though? The answer to this question depends on a couple of factors

Causes of Mold in Your Home and How to Prevent It

The last thing you want is a house full of mold. But you can’t stop it. No matter how clean you keep your home, it will always contain invisible mold spores. Disinfectant can only do so much because these tiny fungi seeds are an ever-present part of nature’s recycling system. And they fulfill a necessary, vital part in decomposing organic material.

It’s when fungi spore cultures become colonies of slimy, dark mold that things get messy. They get dangerous as well. Intolerance to pathogenic mycotoxins that mold cultures emit causes serious health problems for many people. For some, it can be a permanent disability or even premature death.

While it’s impossible to entirely eradicate the presence of microscopic mold spores from your house, you certainly can prevent mold in your home. The key is controlling moisture. Much of mold troubles come from simple and slow plumbing leaks. But there’s far more to knowing how to prevent mold damage than calling a plumber.

A plumber is an excellent professional resource who can fix a relatively small water leak before it turns into a giant mold problem. Plumbers are also trained to spot the telltale signs of hidden mold issues and alert you to potential disasters. A plumber’s experience is invaluable as part of mold identification. They can also be priceless in helping with mold prevention.

The first part of knowing how to prevent mold in homes is knowing the causes. Then it’s helpful to know the ramifications of letting a small area of mold contamination spread into a huge and expensive infestation. Learning what mold is, its causes and how to properly clean moldy surfaces should be part of your home-owning education — so should watching for potential mold trouble spots. You also need to know mold’s health hazard symptoms, the safety precautions in handling moldy materials, and your insurance policy implications when it comes to mold damage claims

Mold Removal

Mold that are considered harmful to humans are considered “Toxic Molds”. It is not just one type of mold. “Black Mold”. There are hundreds of molds that are toxic and deadly to humans, only a small fraction of which are not deadly to humans.

Black Molds are considered as the deadliest molds, however molds of other colors are as deadly. Moist dark places are a breeding ground for mold. Mold can also grow on most any organic surface. Moisture and oxygen at the things needed to feed and grow mold.

Five Categories of “Toxic Mold” :






Some of these only have the effect of allergy like symptoms that mimic hay fever. Other however can cause medical problems that are considered potentially deadly. All five of these molds can be found indoors anywhere there is dampness.

UV Light is provided by the sun and also by specially designed lamps. The three types of UV lamps in the market produce UV-A, UV-B and UV-C light. UV-B is used in medical applications to treat patients with Jaundice, Psoriasis, and other skin disorders by irradiating the reactor pads and in rooms to treat the upper level air next to the ceiling. UV-A is less effective in killing bacteria than UV-C. UV-C at 254 nm wavelength is the peak absorbance of DNA and RNA; therefore, the most effective in killing cells, including bacteria. UV light intensity decreases with the square of the distance from the bulb. Therefore, for UV-light to be effective, bacteria and mold cells must be in close proximity to the lamp.

The Pros And Cons Of Doing Your Own Bookkeeping

Bookkeeping Rate – Are You Paying Enough?

Bookkeeping is important every type and size of business to understand businesses growth, follow tax law, budgeting and so on. It is foundation for generating business reports for your business growth. Therefore it is vital to book every single transaction with expertise and accuracy. It is extremely vital for you to understand monthly bookkeeping fees before you engage with a bookkeeper or bookkeeping service firm.

The bookkeeping professional is selling his or her time and expertise to businesses, so the fee for this service is combination of time, current situation, expertise, etc. Some of the most popular services provided by an bookkeeping service firm are listed just below:

  • Account receivable
  • CPA audit report
  • Bank and credit card reconciliation
  • General accounting
  • Payroll processing

Why hire Bookkeeping services?

Some of the key headaches that businesses experience when it comes to handling their own books are errors because of lack of time, paperwork and filling, the complexities of compliance, anything to do with tax, ever changing regulations. An expert bookkeeper can help you with all these tasks related to the financial aspects of your company. It provides you time to focus on the vital activities like growing your customer base so that you can make all that money in the first place. It may feel at times that you are willing to pay any amount to relieve you of the tension of month and year end figures. But that is no reason to employ the first bookkeeping service you come across.  Instead shop around to get a service that meets your business needs as well as save you money. You can search on google for Bookkeeping services near me and hire someone who can be trusted.

Bookkeeping fees

The fees of bookkeeping are dependent upon the vine of transaction whether you have workers, how complex your industry is, also whether you need job costing, there are several factors that can influence the fee but usually there are some ways Bookkeeping professionals set their price. Hourly rate or flat rate are very common with several requesting all or a portion of the price paid in advanced through a deposit or retainer. Also fixed price value bling is starting to gain in popularity while hourly rate is declining as billing method.

Generally a Bookkeeping rate for a freelance bookkeeping professional can range from $20 to $120 per hour. The bookkeeper that you hire in house would have another rate plus all other advantages that you require to give. Additionally the outsourcing bookkeeper has a different rate depending on how much workload is assigned to that person.

What factors to determine booking fee structure?

Industry background, volume of transactions, reporting requirements, number of employees, curt situation of books, number of bank statement, etc. Do not be afraid to give them a bookkeeping test in order to see if the professional will ne able to perform the work you need competently.  Keep in mind that many business owners are in financial ruin because they trusted their bookkeeper to know rules and find out late during an audit how much that person did not know.

What Is The Difference Between Bookkeeping And Accounting?

To understand pricing, it’s helpful to know the difference between bookkeeping and accounting.  These two terms are often used interchangeably, but there is a significant difference between bookkeeping and accounting services.


We have written in detail about what a bookkeeper does in Canada, but the very basic function of a bookkeeper is to record the transactions of a business in a consistent way.  This includes:

  • Recording financial transactions and reconciling accounts at the end of each month or week
  • Recording and paying bills on their due date
  • Creating and issuing invoices
  • Processing and recording payroll
  • Tracking sales taxes (GST / HST / PST etc.), and filing returns

The bookkeeper is in charge of making sure that all transactions are recorded accurately.  The complexity of this job depends on the size of the business, number of transactions to be recorded, and the nature of those transactions.


Accounting can be described as processes that use the information recorded by the bookkeeper to produce higher-level information and reports.  Examples of these services include:

  • Preparing adjusting entries to record information such as inventory adjustments, tax estimates, and other accruals (expenses that have occurred but aren’t yet recorded by the bookkeeper)
  • Preparing and analyzing financial statements to help the business owner make decisions
  • Completing income tax returns
  • Tax planning
  • Business advisory

Accountants aim to provide business owners with an understanding of their financial reporting to drive intelligent, informed decision making.  They also play a key role in reducing taxes where possible. At Avalon, we also add empathy and even emotional support to the role of an accountant; it can be a lonely road running a business, and we want to help entrepreneurs thrive however we can.

Although this is a common pricing method, we find a couple of things wrong with it:

  • Fear of asking questions – It creates a situation where clients feel that they shouldn’t ask questions or learn from their bookkeepers and accountants because they will be on the clock as soon as the phone is answered.  We want to foster an environment where clients get to ask questions without worrying about the resulting bill.
  • Surprise bills – It can also cause surprise bill amounts when more work was required than expected.  Surprise bills kill cash flow for businesses and create animosity between accountants and their clients.

Commercial Carpet Cleaning Pros And Cons

Things To Know Before Buying A Carpet Cleaner

Good carpeting can be an expensive investment in your home, and one that you want to get as many years out of as possible. Your carpet is also something your family walks on in bare feet, plays on, sits on, and sometimes stretches out on. That’s why keeping your carpets clean and in good condition is important. Today’s families are busy people, often trooping in and out of the house several times a day—with or without pets—tracking in dirt, germs, and outside pollutants. That’s why today’s families aren’t always comfortable trusting the cleanliness of their carpets to vacuuming alone.

A typical vacuum may leave your carpet’s surface clean of dust, dirt, and pet hair, but it doesn’t remove dust dirt, allergens, and pollutants stuck deep in the base of the carpet. Vacuum cleaners don’t remove stains from spills, pet accidents, and muddy foot traffic. That’s where it becomes beneficial to have a carpet cleaner in your home. Especially if your home has pets, or contains a lot of carpeting in high traffic areas.

What is a Carpet Cleaner?

A carpet cleaner is designed to be used to clean deeply embedded and ground-in dirt from carpets with a steam or hot water extraction mechanism. Water and carpet cleanser are scrubbed into the carpet fibers by the carpet cleaner’s technology and then the dirty, soapy water is extracted with a powerful vacuum and stored in a tank. This removes dirt, stains, and odors from even deep pile carpets, leaving it clean, soft, and refreshed.

A carpet shampooer mixes soap and warm water and typically sprays it directly onto the carpet. A rotating or revolving brush then works this solution into the carpet fibers to loosen and lift dirt and remove surface stains. A carpet shampooer is excellent for cleaning carpet in high traffic areas. The shampoo or foam is allowed to remain on the carpet surface for a period of time, where it absorbs dirt, grime, stains, and odors, before it is removed with a high-powered vacuum.

Carpet cleaners tend to be heavy. Once you’ve added water and cleaning fluid, you will have added another six to fifteen pounds of weight. Before you choose your carpet cleaner, consider the space you will have to maneuver it around in. Large, open spaces work well with heavier, slightly more cumbersome upright carpet cleaners with large tanks. A good carpet cleaner will have a tank that’s large enough to store plenty of fluid and won’t need emptying or refilling as often during a cleaning. Generally carpet cleaners contain a second tank for storing the dirty water that it extracts from the carpet.

Secrets From the Carpet Cleaning Pros to Help Your Carpets Last Longer

Your carpet cleaner works hard to ensure your carpets are clean and fresh. However, despite your best efforts at cleanliness, carpet will eventually become the victim of drops, spills, accidents, and whatever’s on the bottom of your shoes. After a professional carpet cleaning service, many customers want to know when they should schedule their next cleaning, and what they can do to maintain the results of the latest cleaning

Pro Carpet Cleaning Tip 1: Vacuum, Vacuum, Vacuum

One of the best things you can do to protect and keep your carpet clean is to vacuum frequently. For example, oily dirt tends to attract more oily dirt. The less of it that’s on your carpet, the longer your carpet lasts

Pro Carpet Cleaning Tip 2: Use Entry Mats to Contain Dirt From Outside

Coming home to a clean carpet is always nice. But just because your shoes aren’t muddy, doesn’t mean they are not tracing dirt in from outside. Every time you step through that door, your shoes are bringing in whatever dirt (and other stuff), and tracking it all over the carpet

Pro Carpet Cleaning Tip 3: Spills Happen – Deal With Them Fast

Accidents will happen. Someone might spill a glass of juice, or a bit of gravy from their plate onto the floor. When they do, act fast to mitigate the stain. The longer you wait, the more likely the stain will set in the material and absorb into the carpet fibers. Not only does this cause the stain to remain, but it can also absorb into the carpet padding underneath. This can lead to odor and mold growth deep in your floor. So don’t just let that stain sit there, take care of it immediately.

Pro Carpet Cleaning Tip 4: Use the Proper Stain Removal Product and Technique for Your Spill

Every stain and spill is going to be different. Depending on whether the stain is oil or water based, you will need different cleaning solutions to remove it

How to Clean an Area Rug to Make It Look Like New Again

Area rugs warm up floors, inject color and pattern into a space, and create zones in your home’s living quarters. But along with area rugs often come stains and debris, so it’s important to know how to clean an area rug.

The first step to cleaning an area rug is to identify your rug’s material. This is important in prolonging its life, as different materials require unique area rug cleaning methods and materials. Our handy area rug cleaning guide will introduce you to the many types of rugs and offer tips and instructions for area rug cleaning and stain removal.

Basic Area Rug Care

Size, construction, and material determine the best way to clean an area rug. Care for large area rugs as you would wall-to-wall carpet

That means most rugs will benefit from the following care routine:

Vacuum large area rugs to remove dirt: As with carpet, regular vacuuming is the most important area rug cleaning step you can take. If a rug is reversible, vacuum both sides. This removes grit and grime that can wear out your rug prematurely. Take care to not vacuum any fringe. (Turn off the beater bar when vacuuming a shag rug to prevent tangling the long fibers.)

Brush out pet hair: A vacuum will sometimes leave pet hair behind. Use a stiff brush to remove the hair, brushing in the direction of the nap of the rug.

Turn rugs every year: Foot traffic and sun can put extra stress on area rugs. Turn them once or twice a year to even out the wear.

Shake small area rugs: If the rug is small enough, you can take it outside and shake it or beat it vigorously to remove dirt and grit. Some areas have ordinances about shaking rugs outdoors, so check your local codes first.

How to Clean a Rug: Material-by-Material Guide

Special types of rugs require special cleaning care. File away care tags on the rug for easy reference. Pay close attention to the manufacturer’s recommendations for deep cleaning and using a rug shampooer or a cleaning machine on the rug

Cleaning & Restoration Services

You’ll Get Deep Down Carpet Cleaning

You and your valuable carpets deserve more than a cheap surface clean. unique pet and child-safe cleaning solutions are formulated to give you a deep-down Carpet Cleaning service without any of the harmful side effects associated with many cheap carpet cleaning chemicals.

Whichever of methods use to clean your carpet, systems do not need to use the gallons of water that cheaper cleaners or DIY machines often rely on to really deep clean. This means your carpets will be thoroughly deep cleaned and dry in just one to two hours, so minimum inconvenience and you’ll be using the rooms again in no time.

Carpet Cleaning that Stays Cleaner for Longer

Your carpets not only GET cleaner, but they also STAY cleaner for longer too because don’t use cheap detergent chemicals that can leave a sticky and dirt-attracting residue behind. don’t just clean the carpet surface, nor do pressure wash the dirt down below the surface, only to have it reappear as the carpet dries

A Hygienically Healthy Carpet Cleaning too

Your carpet acts as a filter in your home and traps all the dead skin cells, bugs, germs, pollen and hundreds of other contaminants that fall onto it.  Carpets help you create a better indoor air quality, but, like all filters, need regular cleaning and sanitising

Myths You Might Still Believe About Carpet Cleaning

IF you get your carpets cleaned improperly, this can be true. Since some methods leave behind sticky residue and soil, it is correct that improper cleaning can make your carpeting soil quickly.

Steam cleaning will cause mold or mildew to grow in my carpet!

Again this could be true IF you get your carpets improperly cleaned, but the proper way of cleaning will NOT cause mold or mildew to happen. We hear from a lot of clients about different companies who have left their carpets soaked for several days. This is not normal, and we never leave your carpets soaking wet. If your carpet is wet for several days, there is a chance that bacteria wants to grow in that environment. Properly cleaned carpets will not create mold or mildew.

Vacuuming too much will damage my carpet!

Modern installed carpeting is designed to hold up to lots and lots of vacuuming. That said, there are some vacuums on the market that may be too aggressive for everyday use. We are not at liberty to name names because we didn’t perform the tests. A large carpet manufacturer once reported that their tests revealed that one particular popular consumer vacuum caused 2 years’ worth of wear with one use! But that’s certainly not the norm and most vacuums are perfectly safe for frequent use on modern carpeting.

Baking soda or other powder deodorizers will remove the smell from my carpet!

Baking soda can absorb some of the odors, but it does not remove the source of the odor. These powder deodorizers also cause havoc for us when we try to clean because it is impossible to vacuum it all out. The leftover powder eventually causes friction and wear, causing permanent damage to your carpet. Not to mention the smell probably will ultimately return. The best way to deal with odors is to remove the source of the odors.

Carpet causes allergies!

Even though this is more so about carpet itself, it still pertains to carpet cleaning and needs some explaining. We have heard over the years of allergists telling people that carpets cause allergies, so they should rip it out of their house! We are cleaners of many things like tile, wood, stone, etc., so we aren’t saying this because we are only ‘carpet cleaners’. We think the origins of this comes from the fact that carpet acts as a filter. Yes, dust, dander, and soil will settle onto your carpet and will stay there if it’s not maintained properly

Family Dentist Pros And Cons

What Is a General Dentist?

The most common dentist is a general dentist. In fact, approximately 79% of all dentists in the US can be considered general dentists and some wonder what general dentists do. We learn to perform most dental procedures except for very complicated advanced dental procedures which require additional training, degrees or certifications. General dentists serve on the front line of diagnostic and preventative procedures for the public. We can diagnose and recognize the early stages of dental disease in the patient’s mouth and treat the disease before the condition progresses too far. We partner closely with our patients to educate and help them with their oral hygiene homecare regimen, which in turn will prevent disease in the future. We believe that healthier results for patients’ oral conditions will occur when they also invest in their own dental health.

Can a General Dentist Perform an Extraction?

General dentists learn how to perform extractions and gum or oral surgery. Some dentists love it and perform frequent surgeries, while other dentists focus only on cosmetics and refer the surgeries to other dental providers. It’s all a matter of preference.

Can a General Dentist do Implants?

Any general dentist can perform the placement of dental implants, although it is advised to have had additional implant surgery training from an accredited advanced learning center. Once again it’s a matter of preference.

Direct Restoration Materials

Direct restorations are repairs made inside the mouth (e.g., cavity fillings). These restorations are also usually placed within one office visit.

  • Composite is a tooth-colored, adhesive bonding material made of acrylic resin. Composite is one of the most common restorative materials for cavity fillings, dental bonds, inlays, and veneers.
  • Amalgam is a mixture of up to 54 percent mercury with silver, tin, and copper. This material is commonly used to restore back teeth (premolars and molars).
  • Conventional Glass Ionomer (CGI) is another tooth-colored restorative material. Glass ionomer is not as durable as amalgam or composite. CGI can effectively restore front teeth, including incisors and canines. Dentists do not restore back teeth, such as premolars and molars, with glass ionomer.
  • Resin-Modified Glass Ionomer (RMGI’s) are similar to conventional glass ionomers, but with more strength and added acrylic resins. RMGI is only used to restore baby teeth.

What Do General Dentists Do?

Of an estimated 143,000 dentists practicing in North America, some 80 percent are general dentists. Unlike specialists, who are mostly focused on a particular aspect of dental practice, general dentists provide a wide array of services that are vital to your continued health, including:

  • Preventive services — These help you maintain good oral health by stopping disease before it takes hold in your mouth. Regular exams (including diagnostic images such as x-rays) and professional teeth cleanings are a cornerstone of prevention. Your general dentist may give you detailed instructions to improve your at-home oral hygiene, and may also recommend preventive treatments such as sealants, if needed. And if you lead an active lifestyle, you can be fitted with a custom-made mouthguard at your dentist’s office.
  • Restorative Services — When a problem is found, your dentist will ensure you get timely and appropriate treatment. Probably the most common (and highly effective) dental restoration involves removing tooth decay and placing a filling in the affected tooth. But that’s not the only restorative procedure general dentists provide. They offer you a place to go when you need prompt treatment for dental trauma—for example, a broken, loosened or knocked-out tooth. General dentists can diagnose and treat the causes of tooth pain or periodontal (gum) disease. They may also offer treatments for missing teeth, place crowns or bridgework, and help you get fitted with dentures. Some provide more advanced treatments, such as root canal therapy, orthodontics, and dental implants, as well.
  • Cosmetic Procedures — Many general dentists can help you get the sparkling smile you’ve always wanted with a range of cosmetic procedures. These include teeth whitening, cosmetic bonding—even porcelain veneers. If a brighter smile is what you’re looking for, ask your general dentist about a smile makeover.
  • Overall Health Concerns — In many respects, your oral health can be seen as a mirror of your general health. Some dental problems may reflect issues in other parts of your body, and vice versa. For example, untreated oral infections can lead to poorer control of diabetes, an increased incidence of cardiovascular disease, and complications during pregnancy. General dentists are trained to identify these and other issues, and offer appropriate treatment or referral when needed. One special concern is obstructive sleep apnea, a potentially deadly condition that can sometimes be treated with an oral appliance. General dentists can also offer nutritional counseling, advice on tobacco cessation and general health and wellness information.

Dental Public Health Clinics

Dental public health clinics promote dental health through organized community efforts. The clinics serve to educate the public through group dental care programs with the goal of preventing and controlling dental diseases on a community-wide basis. Dental public health clinics offer such services as finding a dentist, developing dental care programs for schools, providing information on fluoridation in the community, answering common questions about oral health, and providing other oral health resources and support materials to their community.


An endodontist is the dental specialist concerned with the causes, diagnosis, prevention, and treatment of diseases and injuries of the human dental pulp or the nerve of the tooth. This specialist may perform simple to difficult root canal treatments or other types of surgical root procedures.

Oral and Maxillofacial Radiologist

A radiologist is the oral health care provider who specializes in the taking and interpretation of all types of X-ray images and data that are used in the diagnosis and management of diseases, disorders, and conditions of the oral and maxillofacial region.

How much education is required to become a general dentist?

To become a general dentist, three or more years of undergraduate college education degree (typically with a strong science foundation) plus four years of dental school is required. After graduating, dentists must take a licensure examination which is required by the state in which they practice.

What’s the difference between DMD and DDS?

Just one letter! Both dentists receive the same education and complete the same curriculum requirements. DDS stands for Doctor of Dental Surgery and DMD stands for Doctor of Dental Medicine.

Why does my dentist belong to the AGD?

Your general dentist cares about long-term dental health for you and your family and demonstrates that concern by belonging to the AGD. Members are dedicated to continuing education to help them stay up-to-date on the latest procedures to provide you and your family with quality treatment.

Transitions Of Transmission Repair

Is it better to repair or replace a transmission?

Transmission Problems – Rebuild or Replace?

Some of the most dreaded words any car owner can hear are that their vehicle needs a new transmission.  Replacing a transmission is quite possibly one of the most expensive services that your car will ever require because working with the transmission is incredibly complex and can be quite time-consuming too.  In most circumstances, you have two choices when you replace the transmission on a vehicle. You can rebuild the transmission or install a new (replacement) transmission. So, which of these is the best option? The answer isn’t always cut and dry.

Rebuilding Considerations

Rebuilding a transmission means that your existing transmission will be taken completely apart and inspected. Any damaged parts are replaced until the transmission is back to factory specs. In most cases, the gaskets and other rubber parts will all be replaced, but damaged moving parts may need to be replaced as well. This is a complex process and rebuilding a transmission is a job for a specialist for certain.

The beauty of rebuilding a transmission is that you can rebuild an older transmission with up-to-date parts that manufacturers have designed to be more efficient and safe. While a transmission rebuild is a great solution in many cases, it can be challenging to find a transmission specialist who is up to the task and it may take him or her some time to complete the job correctly.

Installing A Replacement Transmission

Replacing your transmission is a bit misleading–in most cases, you can’t actually find a “new” transmission. You’re likely working with a remanufactured transmission. This is similar to a rebuilt transmission, but it was done in a factory setting. For a quick fix, this is ideal. However, you may not have access to the most up-to-date parts and you don’t get to pick and choose how it is rebuilt.

Work with a Transmission Expert

Deciding on whether your transmission should be rebuilt or replaced is usually a question of cost and time to complete the repair. Having a transmission expert rebuild your transmission may take a little longer and cost a bit more upfront, but it can result in a longer-lasting and better-performing transmission. The other option of installing a “new to you” transmission still assures you have a safe, functional vehicle but you may not get as many options. Whichever way you are leaning, it makes sense to discuss your desires with an expert.

Things to consider before replacing or repairing

There are a few things to consider when deciding whether to replace or repair your transmission or perhaps even scrap or sell the car. Here are some things you should consider.

Frequent breakdowns

If you spend many hours in the garage to replace transmission parts, then it is time to replace them. Long-term repairs are expensive, especially if the problem keeps recurring. Frequent failures are not uncommon with gearboxes that have traveled more than 100,000 miles. If you find that your car spends many hours in the garage instead of on the road, it’s time to replace it.

Most transmission problems can be solved. A repair will cost you several hundred dollars, but if the total cost of the repair exceeds the cost of a new transmission, it’s time to buy a new transmission.

Fixing transmission problems

It can be a Herculean task for car owners to know what is wrong with the car’s transmission and you will need to ask your mechanic for help. There are some gearbox repairs that are easy to fix, while others are so expensive that a new transmission is required.

Delayed shifting response

The transmission helps to change the gear system. If you are driving your car and suddenly the gears are delayed, you have a problem with the transmission. If you drive a manual car, you will have difficulty shifting the car into the correct gear. With automatic cars, there is a delay in engaging the gear when the car is parked in the car park.

You will notice that the car does not move because the engine is roaring and there is some kind of delay. This is often a worn clutch that can be easily changed. You should rev up the car when changing gears and pay attention to a delayed shift reaction.

Clunking or humming sound

First, there are many engine components that can produce this rattling noise. You must eliminate these before you commit yourself to the transmission. It could be that your drive axle bearings or brake pads are worn out. A well-running transmission is often quiet, but the rattling noise is more pronounced in vehicles with manual transmission than in automatic vehicles.

As soon as you hear this humming, have the car checked by a mechanic. Further use of the car will cause more damage.

Diagnostics Are Everything

Once you have come to the conclusion that it’s actually the transmission that needs to be fixed, this can lead to an entirely new set of conclusions that may be drawn. Many of us make the mistake of bringing our vehicle to any transmission repair shop that may do it quickly or at a reasonable price. However, you need a reputable mechanic shop that knows how to correctly Vehicle Courtesy Check what has failed.

Even though a transmission repair can cost a lot, it is worth doing it right the first time with someone you can trust. A repair shop that knows how to correctly diagnose what the problem really is and how to fix it the right way is ideal. There are actually three different options when it comes to getting your transmission back to a good working condition-make sure that the right option is chosen for your particular issue.

Automatic or manual – what’s the difference?

In most cases, we tend to think a car has either a manual or automatic transmission. There are varying levels of automatic transmission, but for this article, we’ll assume only the two.

Manual transmissions use a stick shift to change gear ratios manually. If you’ve ever driven a manual, you know how to “feel” the process. As the engine revs, you push the clutch in to separate the gears. You use the shift to move between several different positions, then engage by pulling back on the clutch. You can hear the engine power reach capacity before engaging the process all over again.

Automatic transmissions do the same thing through the use of fluid pressure. An automatic transmission uses transmission fluid to provide the necessary pressure to activate the clutch and determine which gear the car should be in. It finds the right gear ratio and places the gear in motion.

When is Transmission Replacement Better Than Repair?

Transmission replacement – transmission repair guyYou should consider replacement when your current transmission is giving you a lot of problems, it is on the verge of failure, it would take too long to diagnose and fix, or the cost to repair is higher than what it costs to replace. Here’s why:

Lots of problems – If your current transmission is giving you a lot of problems, it could indicate that there are more problems to come. This means you will have to bring your car in for repairs multiple times, which will add up over time. In the long run you might be paying a lot more just to repair it when you can replace it and not have to worry about future problems.

On the verge of failure – If your transmission is on the verge of failure, transmission replacement would be a good idea. A transmission that hasn’t been well cared for will have a shorter lifespan, so if it needs repair but has 100,000 miles and up, that should be a sign to replace. If you choose to repair it now, it might fail soon afterwards and you’ll end up replacing it anyways.

Too long to diagnose and fix – Sometimes transmissions will develop problems that take too long to diagnose, and the longer your car stays in the shop, the more you’ll have to pay in the end. If the repair shop is having a hard time finding what the problem is, you might want to consider replacing your transmission unless you want the charges to stack up.

High transmission repair cost – Transmission repair won’t always be expensive, but this depends on how big the problem is. Costs can run anywhere from $1500 for minor repairs to $4000 for a complete rebuild. If the problem is minor you should opt for repair, but if repairs cost more than transmission replacement you should consider the latter as you’ll be saving money as well as getting a quality transmission out of it.

Getting The Best Protection From Possums Control Services



Distinctive features: Furry body, long bushy tail, shorter front legs, pair of fused toes on hind feet, protruding brown eyes, pointed snout with pink nose, pointed ears without fur on the inside.

Size: Similar size to a cat.

Droppings: Crescent shaped pellets, in groups or single.

Footprints: Five-toed fore-feet, different hind-feet, claw marks.

Kill signs: Messy eaters, regurgitated pellets, egg shell fragments pushed into the egg.

Vegetation damage: Ragged edges on leaves, often in tree tops. Partially eaten leaves, leaf stems, fruits and flowers on the ground.  Bark chews and scratches.

Eye shine: Red


Ecological impacts

Possums threaten ecology because they can increase to population densities where their browsing pressure can defoliate canopy and understorey vegetation.  They also compete with and prey on our native fauna.

Possums damage our native forests by browsing on foliage, flowers and fruit, especially of some preferred plant species. Their browsing can reduce flowering and fruiting, kill trees, and result in forest canopy collapse. The forest’s ability to regenerate is reduced because fewer seeds are produced. Some possum-preferred plant species have disappeared in some areas

Because possums eat the same food that native birds rely on the food available for native fauna is reduced. Less food means reduced breeding success for native birds and insects.

Possum competition and predation can also cause bird populations to decline. Possums compete for nest sites with hole-nesting birds such as kiwi, parakeets and saddlebacks, and eat the eggs, nestlings and adults of native birds. Possums eat large native land snails like Wainuia, Powelliphanta and Placostylus, which include many rare species. A single possum can eat more than 60 Powelliphanta per night!

Is there anything awesome about possums?

I have this weird relationship with possums — in that I hate them but they keep showing up in my neighborhood. The latest encounter came as we were walking our dog late one night, in the rain. As I kept my eyes down to avoid stepping in giant mud puddles, I heard my son say, “What is THAT?”

Possums will eat anything — grubs and other insects, small snakes, trash on the side of the road, even dead animals. “They’re kind of nature’s disposal,” he said. “They get rid of a lot of the things that other animals won’t touch. In the city, they’ll be the ones that clean up the road kill.”

“They’re constantly grooming,” he said. Which brings us back to the ticks: “They literally will groom all the ticks off themselves and eat them. They’re the only real animal that does that.”

Possums also don’t seem to be a known carrier of many diseases or viruses, including Lyme disease, which is borne by ticks, he said. One hypothesis is that the possum’s slow metabolism makes it a poor host for viruses, which want to reproduce quickly.

Possums roam the neighborhood at night hunting for food and like to find a secluded place to nest during the day — in a burrow, woodpile or crawl space, beneath a porch or shed, or even in an overgrown patch of bushes.


acknowledges that possums are prevalent in the Burnside area and they can cause significant distress to some residents. Possums are native to this area and we would like to find ways to live harmoniously together. Although possums may cause disruptions when they decide to inhabit your property, they are not unmanageable. offers the following solutions to residents.

Possum Nest Boxes

The clearing of Adelaide’s original bushland has resulted in the loss of natural nesting hollows in old trees. can mimic natural hollows by installing nesting boxes to help provide possum homes and deter them from living in roof cavities by supplementing naturally occurring hollows with nesting boxes, providing native food plants and retaining vegetation corridors you are sustainably supporting these extraordinary suburban neighbours.

Private Contractor Services

Pest controllers providing a possum removal service require a permit from the Department of Environment, Water and Natural Resources. This permit grants approval for a pest controller to trap and release possums on behalf of the landholder onto the landholder’s property within 50 metres of the capture site. Ask the pest controller to show you a copy of their permit or ask for their permit number.

Possum Traps

Possum traps allow for the removal of possums from your roof cavity so that you may block up access points. Once a possum is trapped it is illegal to remove it from your property and therefore must be released back into your property, within 50 metres of the capture site, within 24 hours. It is also illegal to trap possums without a permit.

About Opossums

The opossum is a medium-sized mammal, about the size of a house cat, with gray to black fur, a pink nose, naked ears, and an almost hairless prehensile tail (able to grasp, hold or wrap around). They are North America’s only marsupial. They are solitary, slow moving animals who are most active at night, when they wander randomly in search for food.

Although they are excellent climbers and have been known to live in tree cavities, they prefer to den on the ground in old woodchuck burrows, brush/wood piles, and even in spaces under decks or patios. Opossums are omnivorous and are beneficial to humans because they cause very little damage and they consume undesirable insects, snails, and slugs.

The many beneficial qualities of Opossums include:

Keeping neighborhoods clear of unwanted pests like cockroaches, rats, and mice.

Reducing the Lyme disease carrying tick population, eating nearly 95% that cross their path.

Resistance to snake venom, and eat venomous species.

An extremely low risk of contracting rabies!

Keeping gardens blooming by eating snails, slugs, and fallen, overripe fruit

Opossums are usually shy and harmless animals, with two main defense mechanisms.  First, if an opossum is frightened and unable to flee, she may display her teeth and hiss. Although this behavior might appear fierce, it is usually just a warning.  Second, if they feel they are in real danger, they might “play possum” and have the appearance of being dead. When the opossum feels that he is no longer in danger, he will revive himself and move on.

The life span of opossums is very short. A four-year old wild opossum is a rarity. The average female probably lives through one breeding season in which time she may raise two litters of approximately a dozen young. Once born, the young instinctively crawl upward into the mother’s pouch where they will nurse for approximately fifty days.  When they grow to be approximately 3 – 4 inches long, they crawl out of their mother’s pouch and ride around on their mother’s back.  If they fall off, their mother may not notice because they are so small.  They are independent of their mother at about three months old. These large litters help accommodate for the high mortality rate opossums face.

DIY stink bomb to deter possums

How to make a stink bomb

Simply grab an old sock and fill it with a handful of blood and bone fertiliser. Identify the possum’s main point of entry to your garden and secure your stink bomb to block their path.

LED lights to deter possums

“We’d tried everything to stop possums eating the plants on our front deck, which they accessed via a large lilli pilli. Chicken wire cages over the pots were successful but unsightly. But since we put up some solar LED bud lights in the lilli pilli, we haven’t seen a possum at all and the lights look very pretty at night,” one reader wrote.

Fish oil to deter possums

Additionally, another reader came up with a way to stop possums eating their rose shoots using fish oil.

“Add about half a cup of oil to one litre of water and spray it on the shoots. It won’t harm the roses but the possums hate the smell. Naturally, you’ll have to put more on after it rains but it works a treat and is very cheap.”